Single-channel 5V 30A Relay Module
50+ in stock
The Songle Single-channel 5V 30A Relay Module power failure relay is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
₵35.00
50+ in stock
The Songle Single-channel 5V 30A Relay Module power failure relay is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.
Tech specifications
- Optical coupling isolation, driving ability is strong, stable performance; Trigger current is 5mA
- The module can be set high level or low-level trigger by the jumper
- The Rated current of the interface is 16A
- DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal.
- High and low-level trigger mode selection. Jumper and L pin connection, IN pin, is low-level triggerJumper and H pin connection, IN pin, is the high-level trigger.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sensors, Modules & Shields
Digital Capacitive Touch Switch Module
Digital Capacitive Touch Switch Module is based on TTP223B. Normally, it outputs low and keeps at a low power state. When a touch is sensed on the circular marked region, it outputs high and switches to the quick response state. When not being touched for 12 seconds, it switches to a low power state again. If the module is mounted on the surfaces of non-metallic materials such as plastic, glass, acrylic, you can make the keys hidden in the walls and desks.
SKU: n/a -
Sensors, Modules & Shields
MQ-6 Liquefied Isobutane Propane Sensor Module
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.
SKU: 2010 -
Sensors, Modules & Shields
MT3608 DC-DC Step Up Power Booster Module
This MT3608 DC-DC Step Up Power Booster Module is a low-cost module that can step-up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. The MT3608 converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs. This boost converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings.
SKU: n/a -
Sensors, Modules & Shields, Solar Products & Batteries
6volt-2watt solar panel module
6volt-2watt solar panel which can deliver up to 6V, 330mA. This solar panel is ideal for space-constrained applications where small voltage is required. When operating in sunlight or a bright artificial light environment, the optical energy will activate the solar cell and generate a voltage at the output. The panel is capable of 2watts in the open sun with a peak power output of around 6V at 330mA.
SKU: 1982
There are no reviews yet.