Store
Showing 701–725 of 804 resultsSorted by latest
-
Discrete & SMD components
330Ω 1/2W Metal Film Resistors (Pack of 10)
The 330Ω 1/2W resistor is a vital component used for controlling current, dividing voltage, and managing power dissipation in electronic circuits. With a stable resistance value of 330 ohms and a power rating of 1/2 watt, this resistor is suitable for a wide range of applications, both for professionals and hobbyists
SKU: 2539 -
Discrete & SMD components
220Ω 1/2W Metal Film Resistors (Pack of 10)
The 220Ω 1/2W resistor is an essential component for controlling current, dividing voltage, and managing power dissipation in various electronic circuits. With a stable resistance value of 220 ohms and a power rating of 1/2 watt, this resistor is ideal for both professional and hobbyist applications.
SKU: 2536 -
Discrete & SMD components
10KΩ 1/2W Metal Film Resistors (Pack of 10)
The 10KΩ 1/2W resistor is a fundamental and reliable component for various electronic circuits. Designed to provide a stable resistance of 10K ohm with a power rating of 1/2 watt, this resistor is ideal for limiting current, dividing voltages, and managing power dissipation in your electronic projects.
SKU: 2531 -
LCD Displays & LEDs
3.5″ inch TFT Touch Shield LCD Module for Arduino
3.5 Inch TFT LCD Shield Touch Display Module for Arduino
- Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
- 480X320 resolution, clear display, support for touch function
- Support 16-bit RGB 65K color display, display rich colors
- 8-bit parallel bus, faster than serial SPI refresh
- On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
- Easy to expand the experiment with SD card slot
- Provides an Arduino library with a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
SKU: 2527 -
Prototyping
0.5W 8OHM trumpet, Diameter 36mm
This speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it’s very simple and its metal body is extremely lightweight. A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
SKU: 2522 -
Prototyping
12x12x7.3mm Momentary Tact Tactile Push Button with Yellow Cap
The 12x12x7.3mm Momentary Tact Tactile Push Button with Yellow Cap is a versatile and reliable component designed for a wide range of electronic applications. This tactile switch provides a momentary actuation, returning to its original position when released, making it ideal for user input devices
SKU: 2515 -
Prototyping
Tactile Push Button Switch
This is a square SPST button. What we really like is the little button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB. As this is an THT component make sure you are well versed in soldering before attempting to incorporate this button into your project.
SKU: 2510 -
-
Prototyping
15V 3A AC Step-Down Transformer —None Center-Tapped
This 15V 3A Step-Down Transformer is designed to convert standard 220V AC mains voltage to a safe 15V AC output. With a high current rating of 3 Amps, it’s ideal for powering medium- to high-power electronics, such as linear power supplies, audio amplifiers, battery chargers, and more.
SKU: 2489 -
Prototyping
24V 2A AC Step-Down Transformer — Center-Tapped
This 24V 2A Center Tap Step-Down Transformer is a high-performance, heavy-duty transformer designed to convert 220V AC mains into a 24V AC output with a center tap (12V-0-12V). It is ideal for use in linear power supplies, audio amplifiers, battery chargers, and other electronics requiring dual-voltage AC input.
SKU: 2484 -
Prototyping
4.5v-300ma AC Step-Down Transformer — Center-Tapped
4.5v-300ma Transformer is a single-phase transformer that has two wires at its primary and two at its secondary side of the transformer. The output voltage given is across the entire secondary. secondary side provides voltage from the two leads. Classic style with metal bracket with mounting holes.
SKU: 2479 -
Prototyping
9V Battery Connector with Wire Leads – 10cm Length
This 9V Battery Connector with wire leads is perfect for powering electronic circuits, Arduino projects, and prototyping setups. It features a durable plastic snap cap that securely fits standard 9V batteries, along with 10cm flexible wire leads for easy connections to breadboards, PCBs, or microcontroller inputs.
SKU: 2456 -
Prototyping
9V Battery Connector with DC Barrel Plug – 15cm Cable
This 9V Battery Connector with a pre-attached DC barrel plug is perfect for powering small electronics, Arduino projects, and DIY circuits. It allows you to easily connect a standard 9V battery to any device with a matching DC input, eliminating the need for soldering or custom wiring.
SKU: 2451 -
Prototyping
Aluminum Heat Sink for TO-220
This Aluminum Heat Sink is the best fit for any transistor which produces heat, the Aluminum Heat Sink has the ability to absorbs and dissipates heat generated. The Aluminum Heat Sink 21x15x10mm are used in a wide range of applications. (such as LED design) wherever efficient heat dissipation is required. Heat sinks are made of metal or alloy, which usually includes a combination of aluminum and copper but this type Heat Sink 21x15x10mm Aluminum Heat Sink TO-220 Transistors
SKU: 2446 -
-
Prototyping
10x15cm Single-Sided Copper Clad PCB Board – FR4 Material
This 10x15cm Copper Clad PCB Board is ideal for DIY electronics, prototyping, and custom circuit fabrication. Made from high-quality FR4 fiberglass epoxy laminate, it features a smooth, single-sided copper surface that supports precise etching or milling for custom circuit designs.
SKU: 2434 -
Prototyping
Solderless Breadboard 840 Tie-Points
This breadboard consists of one Terminal Strip with 640 Tie-points and 2 Distribution Strips with 200 Tie-points. The body is made of ABS plastic material. The board is completely reusable and enables easy component placement. another feature is that the breadboard possesses Phosphor bronze nickel plated spring clips. Also, the board facilitates the acceptance of a variety of wire sizes(AWG:20-29). All these make the design process easy and changes can be made on the circuits very quickly. Also, it is simple to combine other breadboards.
SKU: 2430 -
Soldering Stations & Power suppliers, Tools & Test Instruments
YIHUA R-307 GLUE GUN
The Glue Gun R307 is a compact and reliable adhesive tool for all your DIY and crafting needs. Whether you’re bonding materials, repairing household items, or creating unique projects, this easy-to-use glue gun ensures a strong and precise hold every time.
SKU: 2375
