3.5" inch TFT Touch Shield LCD Module for Arduino
Estimated delivery between Wednesday, April 29th - Friday, May 1st
1 × ₵225.00
Subtotal:
₵229.00
LCD Displays & LEDs
5mm White LEDs – Pack of 10
Availability:
50+ in stock
LEDs – those blinky things. A must-have for power indication, pin status, optoelectronic sensors, and fun blinky displays. This is a very standard white LED. The lens is 5mm in diameter, diffused, and has a typical forward voltage of 2.0V and a rated.
₵5.00
50+ in stock
LEDs – those blinky things. A must-have for power indication, pin status, optoelectronic sensors, and fun blinky displays. This is a very standard white LED. The lens is 5mm in diameter, diffused, and has a typical forward voltage of 2.0V and a rated.
Technical Details
- 2.0-2.4 VDC forward drop
- Max current: 20mA
- Suggested using current: 16-18mA
- Luminous Intensity: 150-200mcd
Package includes:
- 10 x LED – White 5mm
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
LCD Displays & LEDs
LED RGB 5mm 4 Pins
LED RGB 5mm 4 Pins is Tri-color LEDs with red, green, and blue emitters, in general using a four-wire connection with one common lead (anode or cathode). These LEDs can have either common positive or common negative leads. Others, however, have only two leads (positive and negative) and have a built-in tiny electronic control unit.
SKU: 879 -
LCD Displays & LEDs, Raspberry Pi
3.5 inch Touch Display for Raspberry Pi
This is designed for Raspberry Pi Model B/B+, 3.5inch RPi LCD (A) is an ideal alternative solution for the HDMI monitor. Combined with portable power this display module is the most convenient men-machine interface for Raspberry Pi. It supports the Raspbian system, enabling your system to; play videos (supports multi formats, MP4 and so on) and take photos by touching (up to 17 camera modes). Also, it supports software keyboard aiding system interaction without a keyboard or mouse. It can be even used in your customized Raspbian system directly.
SKU: 3524 -
LCD Displays & LEDs
1 digit seven display
A 1 digit seven segment display is a single LED consist of two terminals, an anode and a cathode. The anode is the positive terminal and the cathode is the negative terminal:
To power the LED, you connect the cathode to ground and the anode to the voltage supply. The LED can be turned on or off by switching power at the anode or the cathode.
SKU: 2609 -
LCD Displays & LEDs
3.5″ inch TFT Touch Shield LCD Module for Arduino
3.5 Inch TFT LCD Shield Touch Display Module for Arduino
- Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
- 480X320 resolution, clear display, support for touch function
- Support 16-bit RGB 65K color display, display rich colors
- 8-bit parallel bus, faster than serial SPI refresh
- On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
- Easy to expand the experiment with SD card slot
- Provides an Arduino library with a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
SKU: 2527
There are no reviews yet.