KA7500B SMPS Controller SMD
25 in stock
The KA7500B is used for the control circuit of the PWM switching regulator. The KA7500B consists of a 5V reference voltage circuit, two error amplifiers, a flip flop, an output control circuit, a PWM comparator, a dead time comparator, and an oscillator. This device can be operated at a switching frequency of 1 kHz to 300 kHz.
₵7.00
25 in stock
The KA7500B is used for the control circuit of the PWM switching regulator. The KA7500B consists of a 5V reference voltage circuit, two error amplifiers, a flip flop, an output control circuit, a PWM comparator, a dead time comparator, and an oscillator. This device can be operated at a switching frequency of 1 kHz to 300 kHz.
Features
The KA7500B is used for the control circuit of the PWM switching regulator. The KA7500B consists of a 5V reference voltage circuit, two error amplifiers, a flip flop, an output control circuit, a PWM comparator, a dead time comparator and an oscillator. This device can be operated at a switching frequency of 1 kHz to 300 kHz.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Discrete & SMD components
220uF 50v Electrolytic Capacitors (Pack of 10)
Electrolytic capacitors are polarized capacitors whose anode (+) is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the electrolytic capacitor. A non-solid or solid electrolyte covers the surface of this oxide layer, serving in principle as the second electrode (cathode) (-) of the capacitor. Electrolytic capacitors are typically used most in applications such as audio amplifiers of all types (hi-fi to mobile phones) and in power supply circuits
SKU: 2736 -
Discrete & SMD components
10uF 50v Electrolytic Capacitors (Pack of 10)
Electrolytic capacitors are polarized capacitors whose anode (+) is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the electrolytic capacitor. A non-solid or solid electrolyte covers the surface of this oxide layer, serving in principle as the second electrode (cathode) (-) of the capacitor. Electrolytic capacitors are typically used most in applications such as audio amplifiers of all types (hi-fi to mobile phones) and in power supply circuits
SKU: 2763 -
Discrete & SMD components
330Ω 1/2W Metal Film Resistors (Pack of 10)
The 330Ω 1/2W resistor is a vital component used for controlling current, dividing voltage, and managing power dissipation in electronic circuits. With a stable resistance value of 330 ohms and a power rating of 1/2 watt, this resistor is suitable for a wide range of applications, both for professionals and hobbyists
SKU: 2539 -
Discrete & SMD components
100uF 50v Electrolytic Capacitors (Pack of 10)
Electrolytic capacitors are polarized capacitors whose anode (+) is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the electrolytic capacitor. A non-solid or solid electrolyte covers the surface of this oxide layer, serving in principle as the second electrode (cathode) (-) of the capacitor. Electrolytic capacitors are typically used most in applications such as audio amplifiers of all types (hi-fi to mobile phones) and in power supply circuits
SKU: 2760
There are no reviews yet.