650nm Laser sensor Module 6mm 5V
50+ in stock
The LASER MODULE 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply.
₵28.00
50+ in stock
The LASER MODULE 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply.
Laser Diode Module is a breadboard friendly, low cost having the wavelength of 650nm and operating voltage of 5V. The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5v dc power supply.
Pay attention to the laser cell to prevent from being burnt or battery explosion due to a short circuit when removing the battery.
Warning!!! This is a low power laser device, however as with all laser devices care should be taken when in use. You should never look directly in to its beam or point the laser at another person. Doing so may cause permanent eye damage. This item is not suitable for children
Technical Details
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C.
Applications :
- Laser test tools.
- Concentricity positioning.
- Medical equipment positioning.
- Production of signal equipment.
- Use for DIY or robots.
- All kinds of level meters.
- Laser projector.
- Laser toys, etc.
Related products
-
Sensors, Modules & Shields
4-Channel 5V Relay Module
4-Channel 5V Relay Module With Opto Isolated Input is a 4-Channel Relay interface board with optocoupler that allows you to control various appliances, and other equipment’s with large current. It can be controlled directly by Micro-controller (Arduino, Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This board is used in home applications and industrial purposes and many others. Input signals are given by microcontrollers.
SKU: 1179 -
Sensors, Modules & Shields
8-Channel 5V Relay Module
8-Channel 5V Relay Module With Opto Isolated Input is an 8-Channel Relay interface board with optocoupler that allows you to control various appliances, and other equipment’s with large current. It can be controlled directly by Micro-controller (Arduino, Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). This board is used in home applications and industrial purposes and many others. Input signals are given by microcontrollers.
SKU: 1183 -
Sensors, Modules & Shields, Solar Products & Batteries
18volt-30watt solar panel
18volt-30watt solar panel which can deliver up to 18V, 1.1A. This solar panel is ideal for space-constrained applications where small voltage is required. When operating in sunlight or a bright artificial light environment, the optical energy will activate the solar cell and generate a voltage at the output. The panel is capable of 30watts in the open sun with a peak power output of around 18V at 1.1A.
SKU: 1973 -
Sensors, Modules & Shields
2-Channel 5V Relay Module
2-Channel 5V Relay Module is a relay interface board, it can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on. It uses a low level triggered control signal (3.3-5VDC) to control the relay. Triggering the relay operates the normally open or normally closed contacts. It is frequently used in an automatic control circuit. To put it simply, it is an automatic switch to control a high-current circuit with a low-current signal.5V relay signal input voltage range, 0-5V. VCC power to the system. JD-VCC relay in the power supply. JD-VCC and VCC can be shorted.
SKU: 1173
