12mm Light Dependent Resistor (LDR)
50+ in stock
12mm Light Dependent Resistor (LDR) is a resistor made of semi-conductor material and the conductance changes with luminance variation. The photoresistor can be manufactured with different figures and illuminated areas based on this characteristic. A Light Dependent Resistor is widely used for many applications such as toys, lamps, cameras, automatic lighting control, etc.
₵6.00
50+ in stock
12mm Light Dependent Resistor (LDR) is a resistor made of semi-conductor material and the conductance changes with luminance variation. The photoresistor can be manufactured with different figures and illuminated areas based on this characteristic. A Light Dependent Resistor is widely used for many applications such as toys, lamps, cameras, automatic lighting control, etc.
Features:
- Passive resistance output
- Ceramic package
Package Includes:
- 5mm 5528 LDR Light Dependent Resistor
- 10-20K
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Sensors, Modules & Shields, Solar Products & Batteries
18volt-30watt solar panel
18volt-30watt solar panel which can deliver up to 18V, 1.1A. This solar panel is ideal for space-constrained applications where small voltage is required. When operating in sunlight or a bright artificial light environment, the optical energy will activate the solar cell and generate a voltage at the output. The panel is capable of 30watts in the open sun with a peak power output of around 18V at 1.1A.
SKU: 1973 -
Sensors, Modules & Shields
1-Channel 5V Relay Module
1-Channel 5V Relay Module is a 5V 1-channel relay interface board with screw terminal, it can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on. The board has a high-quality relay, which can handle a maximum of 15A at 125V or 10AA at 250V AC. Relay has three connections – Common – C, Normally Open-NO, Normally Closed-NC brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication and a relay status LED to ease debugging. Power input and relay control signals are brought to header pins on the board. Hence, the board can be easily interfaced with our development boards using our jumper wires.
SKU: 1170 -
There are no reviews yet.